Voron 0.2
B✓ Confirmed fresh May 19, 2026
Sign up to InstallAbout this program
Voron Zero is a compact, fully-enclosed CoreXY 3D printer designed for high-speed, high-quality printing in a small footprint. The V0.2 revision is the official release maintained by Voron Design.
Highlights
- 120�120�120 mm build volume
- CoreXY motion system
- Low-mass direct-drive extruder (Mini Stealthburner)
- Fully enclosed chamber
- 24V DC heated bed
- Klipper firmware
- Filament runout sensor
- Sensorless homing
What's in this program
- Full STL set for the V0.2r1 revision (134 printed parts)
- Pointer to the official assembly manual PDF
- Klipper firmware configuration profile
- BOM via the Voron configurator
Build notes
The Voron community provides an interactive Printed Parts Guide and an active Discord for build support. Expect a multi-weekend build for first-timers.
Source: https://github.com/VoronDesign/Voron-0 (GPL-3.0)
🖨 Print Files (15)
M2_Nut_Adapter_Rotated_x5.stl
A_Drive_Frame_Lower_x1.stl
A_Drive_Frame_Upper_x1.stl
A_Idler_Lower_x1.stl
A_Idler_Upper_x1.stl
B_Drive_Frame_Lower_x1.stl
Required Hardware
Voron 0.2 R1 Bill of Materials
Source of truth: the Voron Configurator generates a customized BOM (Misumi part numbers + sourcing options). The list below is the canonical V0.2 R1 parts list for à-la-carte sourcing. Most builders buy a complete kit (LDO or Formbot) and skip the line-by-line ordering.
Build volume: 120 × 120 × 120 mm · Motion: CoreXY · Firmware: Klipper · Frame: 1515 MakerBeam XL
Kit options (recommended for first-time builders)
| Item | Qty | Notes |
|---|---|---|
| LDO Voron 0.2 R1 Full Kit (Rev. C) | 1 | Most complete kit; ~$800. Includes frame, motors, MGN7H rails, BTT SKR Mini E3 v3, Phaetus Dragon, PEI plate, panels |
| Formbot Voron V0.2 Kit | 1 | Budget alternative; ~$550. Frame + motors + electronics |
| Fysetc Voron 0.2 Kit | 1 | Mid-tier alternative |
Frame — 1515 MakerBeam XL extrusions
| Item | Qty | Notes |
|---|---|---|
| 1515 MakerBeam XL extrusion (vertical Z — see V0.2 manual cut list) | 4 | MakerBeam XL 1515; verify exact lengths against Voron Configurator — part numbers vary by supplier |
| 1515 MakerBeam XL extrusion (top/bottom front-back — see V0.2 manual cut list) | 4 | MakerBeam XL 1515; cut to length or order from Misumi/MakerBeam |